Playground Equipment

Looking for a playground with a particular piece of equipment? This website is attempting to create an index of playable playground elements found at Chicago Park District playgrounds. You can browse the entire set of playground equipment or explore smaller sets of equipment grouped into more meaningful categories below. Of course, this index is incomplete, somewhat subjective, and hopefully funny.

  • Thing
    Swinging Seats
    A strange features consisting of four seats connected by two horizontal beams that swing as sets.
  • Thing
    Double Swing
    A swing with two belt seats.
  • Thing
    Green Seat Swing
    An unusual swing, the swing is a green C shaped piece of plastic suspended by four corners. Always part of a larger structure and not part of a traditional set of swings.
  • Thing
    Triple Saucer Swing
    A swing that is hung from a single overhead point with two rings above a saucer.
  • Thing
    Hammock Saucer Swing with Spider Seat
    A swing suspended from two points with a seat that looks like a spider web.
  • Thing
    Circle Seat Swing
    A swing with a circular seat suspended from a fixed point overhead.
  • Thing
    Hammock Saucer Swing
    A swing suspended from two points with a seat that is shaped like a saucer.
  • Thing
    Hammock Swing
    A swinging element fixed between two vertical beams, typically low to the ground, made of a rubber belt that swings freely.
  • Thing
    Double Swing: Toddler and Belt Seat
    A swinging element featuring two seats facing each other; typically one seat is a belt seat and the other is a toddler swing.
  • Thing
    Tire Swing
    A tire or similar torus shaped element suspended from a point above.
  • Thing
    Saucer Swing
    A swing suspended from a fixed point with a seat that is shaped like a saucer.
  • Thing
    Adaptive Swing with Harness
    A molded bucket seat swing with a harness or other mechanism to secure the user.
  • Thing
    Adaptive Swing
    A swinging element consisting of a large molded seat suspended by four chains from an overhead support beam.
  • Thing
    Toddler Swing
    A swinging element consisting of a bucket-like seat, typically with leg openings, intended for use by a toddler or very young child.
  • Thing
    Belt Seat Swing
    The classic. The standard. A swing with a somewhat flexible belt suspended on either side from two chains. *Sometimes the seats are actually not flexible but rigid. I may disambiguate at some point in the future.*
Browse all
Browse all
Browse all
Browse all
Browse all
Browse all
  • Thing
    Double Dip Traverse
    A metal traverse element with two parallel metal beams that each have one dip in them.
  • Thing
    Pole and Rope Suspension Bridge
    A huge, standalone element created by vertical metal poles with ropes and metal 'rungs' creating a suspension bridge meant to be climbed and traversed.
  • Thing
    KOMPAN Twisted Traverse Element 2
    A collection of play elements. The general shape is an arc and there are lots of ropes with discs and spheres, a green seat swing, and a curved climbing wall.
  • Thing
    Horizontal Ladder
    A ladder that is horizontal (coplanar and perpendicular to the ground). It's also not wavy.
  • Thing
    Rope Traverse 5: Three Ropes in 2D
    A rope traverse element with one bottom rope, one top rope, and a rope strung between the top and bottom creating rectangular shapes. All in one plane perpendicular to the ground and coplanar with the support poles.
  • Thing
    Rope Traverse 4: Single Rope with Handles
    Traverse element with a single rope on the bottom with handles suspended from a single rope on the top.
  • Thing
    Angled Triangle Cargo Net
    A triangular cargo net set at an angle between three posts.
  • Thing
    Plastic Traverse with Circular Voids
    A traverse that connects two platforms made of plastic that has circular voids for hand/foot holds.
  • Thing
    Rope Net Traverse with Wooden Plank Steps
    It's a rope net traverse element with two parallel ropes at the bottom and two parallel ropes at the top. Between the bottom ropes are a few wood plank steps.
  • Thing
    Plastic Traverse
    An element connecting two platforms made from plastic.
  • Thing
    Net Plank Bridge
    A bridge element connecting two platforms created by a rope net bridge with small, separate planks along the bottom.
  • Thing
    Rope Traverse in an Arch (Two Rope Bottom)
    A large metal arch with a rope traverse element. The rope traverse element has two ropes running parallel to each other and the ground with planks between the ropes. There are also vertical support ropes forming the legs of a isosceles triangle.
  • Thing
    Freestanding Ladder with Pattern
    It's a ladder with a pattern and it's freestanding.
  • Thing
    Simple Double Traverse
    Two parallel horizontal bars on the same horizontal plane.
  • Thing
    Cloud Traverse
    A standalone traverse element created by a lower support beam with rounded stairstep supports angled toward a central pole and an upper support beam set at the same angle.
  • Thing
    Geometric Metal Traverse
    A traverse element made of two metal horizontal pieces that are somewhat jagged geometric shaped that are mirrored reflections of the other.
Browse all
Browse all
  • Thing
    Standalone Rope Net Tunnel
    A standalone rope/net climbing element consisting of two metal arches angled away from each other with a rope netting forming a tunnel between the two arches.
  • Thing
    Vertical Standalone Spider Web Climber
    A standalone element created by concentric circles or rope that looks like a spider web.
  • Thing
    Four Mast Net Climbing Structure
    A net climbing element created by rope netting connecting four vertical posts with a circular black belt seat in the center.
  • Thing
    Spider Web Ladder
    A rope net climbing element with two anchors in the ground and a tangle of ropes connected to a raised platform.
  • Thing
    Pole and Rope Suspension Bridge
    A huge, standalone element created by vertical metal poles with ropes and metal 'rungs' creating a suspension bridge meant to be climbed and traversed.
  • Thing
    Small Single Mast Climbing Structure 2
    A small single mast climbing structure with a relatively simple (nearly two dimensional) rope net layout.
  • Thing
    Large Spinning Sphere with Nets
    A large, spinning spherical element with rope netting on the surface with additional netting on the equator of the sphere.
  • Thing
    Kite Tangle Climbing Structure
    A large, standalone climbing structure where the skeleton of the structure consists of straight pieces of metal arranged in geometric kites and the interior is a tangle of climbing ropes
Browse all
  • Thing
    Vertical Xylophone with Mallets
    A musical instrument with metal tubes hanging vertically from an arched metal support.
  • Thing
    Piano Knocker Panel
    A musical instrument with small hammers that hit the keys.
  • Thing
    Lilypad Chimes
    A standalone musical element consisting of many circular, metal discs with three mallets.
  • Thing
    Flower Petal Player
    A musical instrument that looks like a flower with four petals and a mallet.
  • Thing
    Drum Set
    A set of drums. There are other drums in playgrounds but this set is called a drum set.
  • Thing
    Tube Drums
    Five tubes with varying diameters meant to be played like the drums.
  • Thing
    Drum
    A standalone drum.
  • Thing
    Xylophone
    A standalone xylophone.
Browse all